保定市清苑区永久模具机械加工厂
地址:河北省保定市清苑县阎庄乡南阎庄村
邮编:yongjiumuju88@163.com
电话:0312-6399288
手机:15233728688
售后热线:15233728688
QQ:240919606
·新闻动态
路牙石模具生产工艺
发布人:admin   发布时间:2020-09-15 09:58

路牙石模具是道路建设中不可缺少的模具种类,对我国建设之路有重要的影响,那么,它的生产工艺又是怎么样呢?
Curbstone mold is an indispensable type of mold in road construction, which has an important impact on the road of our country's construction. So, how about its production technology?

1、制作水泥制品的场地一定要平整、干净、无坑洼。然后浇筑10cm厚的C20混凝土,上铺薄铁作为底膜,模板安装前应对其进行清洗,维修,要擦净模板表面的尘土和其他物质,并对其表面进行打磨、抛光处理,在其表面涂刷脱模剂,不得使用易粘在混凝土上或使混凝土变色的油料。安装模板要在钢筋上缠上海绵条防止漏奖。
1. The production site of cement products must be smooth, clean and free of potholes. The concrete surface shall be polished with 10 cm thick paint or other materials, and the surface of the concrete shall not be polished with other materials, and the surface of concrete shall not be cleaned by polishing or polishing the surface of concrete. During the installation of formwork, the steel bars shall be wrapped with cotton strips to prevent missing awards.

      

2、模具安装好后,根据所需规格制造钢筋笼。3、将搅拌均匀好的混凝土从搅拌机卸出,倾倒置斗车上,经人工定量放料与钢筋笼进模具,然后由运输送至振台进行手动抹平,即可成型。
2. After the mold is installed, the reinforcement cage is manufactured according to the required specifications. 3. The evenly mixed concrete is unloaded from the mixer, tipped onto the inverted bucket car, and then manually and quantitatively discharged and the reinforcement cage is put into the mold, and then transported to the shaking table for manual leveling, which can be shaped.

4、再放置平地进行自然保养,自然养护24小时候便可脱模进行打包,打包后便可可使用叉车运至临时堆放场,待该产品达到所需硬度,便可出货。
4. After 24 hours of natural maintenance, it can be demoulded and packed. After packing, it can be transported to the temporary storage yard by forklift truck. When the product reaches the required hardness, it can be shipped.



Keywords: 路牙石模具 路缘石模具 六角护坡模具